3D printing

Adapted from Wikipedia: http://en.wikipedia.org/wiki/3D_printing

Three-dimensional printing is a method of converting a virtual 3D model into a physical object. 3D printing is a category of rapid prototyping technology. 3D printers typically work by 'printing' successive layers on top of the previous to build up a three dimensional object. 3D printers are generally faster, more affordable and easier to use than other additive fabrication technologies.

Technologies

One variation of 3D printing consists of an inkjet printing system. Layers of a fine powder (plaster, corn starch, or resins) are selectively bonded by "printing" an adhesive from the inkjet printhead in the shape of each cross-section as determined by a CAD file. This technology is the only one that allows for the printing of full color prototypes. It is also recognized as the fastest method.

Alternately, these machines feed liquids, such as photopolymer, through an inkjet-type printhead to form each layer of the model. These Photopolymer Phase machines use an ultraviolet (UV) flood lamp mounted in the print head to cure each layer as it is deposited.

Fused deposition modeling (FDM), a technology also used in traditional rapid prototyping, uses a nozzle to deposit molten polymer onto a support structure, layer by layer.

Another approach is selective fusing of print media in a granular bed. In this variation, the unfused media serves to support overhangs and thin walls in the part being produced, reducing the need for auxiliary temporary supports for the workpiece.

Each technology has its advantages and drawbacks. Generally, the main considerations are speed, cost of the printed prototype, cost of the 3D printer, choice of materials, color capabilities, etc.

Unlike "traditional" additive systems such as stereolithography, 3D printing is optimized for speed, low cost, and ease-of-use, making it suitable for visualizing during the conceptual stages of engineering design when dimensional accuracy and mechanical strength of prototypes are less important. No toxic chemicals like those used in stereolithography are required, and minimal post printing finish work is needed. One need only brush off surrounding powder after the printing process. Bonded powder prints can be further strengthened by wax or thermoset polymer impregnation. FDM parts can be strengthened by wicking another metal into the part.